6 Ice machine maintenance tips

Keeping your unit in good condition is crucial. If you neglect the maintenance part, your unit will underperform and become worthless quickly. However, most people don’t know how to take care of their ice maker properly, and that can have disastrous consequences. Therefore, both scenarios are pretty bad in general.

We have made a list of 6 maintenance tips so that you can get a better insight into the whole process of cleaning and keeping the ice maker in good condition. Read the article, and you won’t have to spend countless hours in front of your PC while searching for the best way to keep your ice maker in good condition.

Inspect for Mold

The first and easiest thing you should do is inspect the machine and see if there’s any mold accumulating on the inner components. The most frequent places for finding mildew are rubber and plastic parts of the unit. If you stumble upon accumulated mold, wipe it with a wet sponge. You can use detergents, but avoid using any aggressive ones because you risk damaging the rubber components.

It’s not unusual to find mold, so don’t panic when you do. It’s a common occurrence because the temperature and humidity are perfect inside the unit for mold to grow and develop. However, it’s crucial that you thoroughly clean it because if you don’t, it only takes a couple of hours for it to grow back again.

Replace the Filters on a Regular Basis

Filters should be changed every six months. It may not be a crucial component, but it’s certainly an important one. Replacing the filter is beneficial for two reasons. The first one is the quality of ice, and the second is the speed of production. Worn out filters need much more time to make ice cubes than new and clean ones. Also, they are much slower in production meaning they need more power to produce the same amount as clean filters.
Replace the filters on a regular basis

Clean it Thoroughly Every Six Months

This tip doesn’t apply only to the water filter maintenance, but rather on every component you have access to. In simpler words, you should open the machine every six months and clean the inner parts, regardless of its state. It’s always better to prevent bad stuff from happening than to look for a solution when they do happen. Therefore, don’t hesitate to check and clean the inner parts of your machine every six months and you shouldn’t have any issues for the next six months.
Clean it thoroughly every six months

Don’t use wet cloth

Although it’s more a matter of common sense, many people neglect this step and use wet sponges and kitchen cloths for cleaning. Because the machine is powered by electricity, it’s extremely dangerous for you to use a soaking wet sponge to clean it. The first thing you should do before every cleaning session is shut the machine down and plug it out of the socket.

After you’ve don’t that, you’ll have a much safer environment for cleaning with a wet cloth. When you finish, be sure to wait for at least an hour for the components to completely dry. When you’re sure that the unit is dry, go ahead and plug it back in.

Prevent Scale From Forming

Scale is one of the biggest enemies of every ice maker. Hard water can have devastating consequences to the inner walls of ice maker’s parts. When hard water dries, minerals like calcium and magnesium form a layer of scale which affects the productivity and integrity of your machine. To prevent the accumulation, aim for the ones that have good water filters. You can find such units by reading our reviews.

Consistency is Key

Whatever schedule you decide to follow, be sure to stay consistent, especially if you’re using the unit frequently. In fact, some models require regular maintenance every three instead of six months due to the poor quality of its components. To avoid buying a new one and spending double the money, try cleaning it more frequently, and you shouldn’t have any major issues. However, if the machine is poorly made, there’s not much you can do but to wait for it to break and purchase a new (better) one.